How to Use TePe Bridge and Implant Floss Correctly

Quick answer

TePe Bridge and Implant Floss is a thick, spongy floss with stiff plastic ends, designed specifically for cleaning around implants, bridges, and braces. Use it daily by threading the stiff end through the gap, wrapping the floss around the abutment or bridge, and gently moving it up and down along the gumline.

Step-by-step guide to using TePe Bridge and Implant Floss

1. Step 1: Cut and prepare the floss: Cut about 30–45 cm (12–18 inches) of floss. Hold one stiff plastic end in each hand. Checkpoint: Do not use a shorter length – you need enough to wrap around your fingers for control.
2. Step 2: Thread the floss under the bridge or around the implant: Insert one stiff end between the teeth and guide it gently under the bridge or around the implant abutment. Pull the floss through until the spongy section sits at the gumline. Common mistake: Forcing the floss can damage delicate gum tissue. If it resists, try a different angle.
3. Step 3: Wrap and clean the surface: Wrap the spongy floss around the tooth, bridge, or implant in a C-shape. Move it up and down along the side of the abutment and under the gumline. Checkpoint: Avoid sawing back and forth – this can abrade the implant surface. Use gentle vertical strokes instead.
4. Step 4: Repeat for each gap with a clean section: Unwind a fresh piece of floss for each new area. Do not reuse the same section to avoid spreading bacteria. Common mistake: Skipping the fresh section can reintroduce plaque to cleaned areas.

Product facts

• TePe Bridge and Implant Floss: TePe Bridge & Implant Floss is a thick and flexible floss, specially designed for cleaning of implants, bridges and braces. It is a spongy floss with stiff plastic ends. The stiff ends let you thread the floss under fixed bridges or around implant posts without fraying, while the spongy body gently scrubs plaque from irregular surfaces.